Browse Instructions
Ikea Agne Bar Stool 24 3/4" ANTI/BLK Assembly Instruction
Posted By: PDogg;
Category: Miscellaneous;
October 25, 2008
Author Ikea;
Here you will find step by step instructions on how to assemble your Ikea Agne Bar Stool 24 3/4" ANTI/BLK.
Click Image To Enlarge
1
Lay the round portion of the bar stool on a flat surface. Next take one of the bar legs and the small screws and screw in the legs to the round portion of the bar stool.
Click Image To Enlarge
2
Take the second portion of the bar stool legs and set it on the round bar stool to the side, as shown in the attached image.
Click Image To Enlarge
3
Take the round metal portion of the bar stool and line it up with the leg holes.
Click Image To Enlarge
4
Insert in the long screws in the round metal portion and screw them to the legs of the stool.
Click Image To Enlarge
5
Take the bar stool legs that where laid across the floor and bring them up straight right. Make sure you line them up screw fasteners on the round bar stool.
Click Image To Enlarge
6
Take the small screws in screw them into the bar legs.
Click Image To Enlarge
7
Screw in the sides of the round metal portion of the bar stool.
Click Image To Enlarge
8
Take the square portion of the bar stool and line it up with the holes on the bottom of the legs. To do this start from the round portion of the bar stool and bring up the square portion of the bar stool to the bottom holes of the leg
Click Image To Enlarge
9
Screw in the square portion of the bar stool to the bar legs.
Click Image To Enlarge
10
Screw in the finial screws to the round portion of the bar stool.
Click Image To Enlarge
11
You have now finished putting together your Ikea Agne Bar Stool 24 3/4" ANTI/BLK.
Only registered users can add comments